Product Dimensions
In Inches
Length: 30
Depth: 21
Height: 42
Product Weight
160.00 pounds
Click the image above for an 800×600 version.
SPECIFICATIONS – New Leslie 122 Series & 147A
- True Mechanical Rotating Upper Horn / Rotating Bass Rotor – NOT a Simulator!
- Classic Vacuum Tube Amplifier – 40 watts RMS, 16 ohm transformered audio output
- 16 Ohm Upper Speaker (Driver), Conservatively rated at 40 watts
- 15′, 16 Ohm Woofer, Long-throw – Rated at 100 watts
- 12 dB / Octave, 16 ohm Crossover, 800 Hz crossover point
- Two-Speed Operation for Chorale (Slow), Tremolo (Fast); ‘Off’ available on some models with some new Hammond organs / keyboards
- Power – 120 VAC, 60 Hz, or 220 VAC, 50 Hz versions available
Leslie 122 Series / 147A Ordering Information
- 122A, 147A – Walnut Cabinet, 6-Pin Leslie Connector on amplifier (for B-3 and similar original organs), new 30′ Leslie cable included, specify 5/6 or 6/6 cable when ordering
- 122XB – Walnut Cabinet, 11-Pin Leslie Connector on amplifier for Direct Plug-In to Hammond XB series organs and Hammond XB-2 Keyboard, new 11-pin 30′ Leslie cable included
- NOTES: Leslie Connector Kits are available which allow the use of the above listed Leslie Models with most early tonewheel generator and newer Hammond organs. Depending upon specific organ and Leslie models, separate channel mixing and selection may or may not be available.
A Pedal Preamp will allow these Leslie’s and most other 6, 9 and 11-pin Leslie models to be used with any keyboard or other 1/4′ device, however no provision is made for separate channel mixing or selection in multi-channel models.
Some Leslie models are especially suited for certain Hammond Organ models. Some early Model Leslie’s cannot be easily connected to Hammond organs or other manufacturers organs or keyboards. Email or call GOFF Professional with your specific needs.