Motion Sound
AR-112 sidewinder
Rotary
Amplifier
(Scroll down or click for item information)
Motion Sound AR-112 sidewinder
A Super
Symmetrical clean/overdrive 12AX7 pre-amp with pre and post EQ, and a Real
mechanical Rotor with fast/slow/stop footswitch and adjustable speed
controls, combines lush rotary chorus and classic tremolo with traditional
non-rotary Guitar 80 watt RMS amplification!
The AR-112
SideWinder can be used with an AB switch to route your guitar to your amp
or to the AR-112 when rotary chorus and tremolo are needed. Since the
AR-112 has a STOP control on the footswitch, you can also use it as your
only amp switching from stop to preset slow and fast speeds as your music
demands. The 12AX7 overdrive gain control can be subtle, or massive with
sustain, and has all the warmth and soul only a real tube can provide. The
pre tube contour control allows you to even the overdrive from low notes
to screaming highs by adjusting the tone before it hits the 12AX7. Post
tube EQ and volume controls can then adjust the sound, as you desire.
- 1/4″
input 12AX7-pre amp channel with contour, bass, treble, gain and volume
controls provides tone from silky smooth to fat even overdrive with real
tube warmth and soul. - Pre amp
gain trim adjusts for tube variance and pickup types - XLR microphone input for harp routed through 12AX7.
- 80-watt
(,02% thd) 100 watt (.2% thd) RMS power amp drives the 150 watt 12″
legend 121 guitar speaker. The speaker is easily accessible via the bottom
cover and is mounted with threaded metal inserts to accommodate change. - Accutronics classic spring reverb with EQ.
- Kick on
the rotary system footswitch (two button provided) and set slow speed for
lush 3D organic chorus effect. Rev up to fast speed for incredible real
classic rotary tremolo. - The slow
control presets a slower chorus speed and the fast speed sets a faster classic tremolo speed. The stop button
over-rides the speed controls for standard guitar amp sound. - The
supplied two-button footswitch LED’s indicate active functions. - Set the
acceleration control for fast/slow ramp up and down times or hit STOP to
provide standard non rotary amplification. - Auto-Stop
stops rotor in the same center position for non-rotary amplifier sound. - Built in
dynamic microphone to XLR output for PA. - 117 VAC
50/60 Hz 200 watts - H 15.5″ W 20″
D 14.5″ W 40 Lbs.
MANUFACTURED BY:
Authorized Dealer:
GOFF Professional
175 Costello Rd.
Newington, CT 06111 U.S.A.
(860) 667-2358 Phone
(860) 667-3523 FAX
E-Mail for information:
[email protected]
GOFF Professional reserves the right to
change prices, specifications, designs, models, equipment and to discontinue products and
services without notice and without liability. The information contained herein is
strictly for information only. No guarantee of accuracy is expressed, nor does anything
contained herein constitute any promise or contractual obligation.
Leslie is a trademark of HAMMOND-SUZUKI.
REV.11.08.02